技術參數(Specifications)：

型號(Model) SEC-400Z
工作范圍(Work Area) 400(X)╳300(Y)╳100(Z)mm
大速度(Travel speed) 500mm/sec
配比精度(Mixing precision) ±2%
吐出精度(Potting precision) ±2%
混合比例(Mixing ratio) 100：100～100：10
吐膠速度(Potting speed) 1g/sec～15g/sec
操作系統(Operation system) Windows2000/XP
計量方式(Metering mode) 步進電機+齒輪泵/旋轉柱塞泵
(Stepping motor+ gear pump/rotary piston pump)
傳動方式(Drive Mode) 伺服馬達/滾珠絲桿( Servo motor/ball screw)
電源(Power supply) AC220V 50HZ 3.0KW
機器尺寸(Size) 2350(L) ╳1600(W)╳1950(H)mm
重量(Weight) 約300KG (About 300KG)
工作環境(Work Condition) 濕度：20-90%， 溫度0-40℃
(Humidity：20-90%， Temperature:0-40℃)


主要配置(Configurations)：
名稱(Title) 單位(Unit) 數量(QTY) 備注(Remarks)
馬達(Motor) 套(kit) 3 松下伺服電機
(Panasonic servo motor)
絲桿導軌
(Lead screw and guide rail) 套(kit) 3 臺灣(Taiwan)
CCD影像系統 套(kit) 1 工業相機(Industrial CCD)
工業電腦(Industrial Computer) 套(kit) 1 品牌電腦(Brand computer)
顯示器(Monitor) 套(kit) 1 17"液晶 (17"LCD)
真空泵(Vacuum pump) 套(kit) 1 德國貝克（BECKER）
輸送線體（Conveying system） 套(kit) 1 世椿（Second）
運動控制器(Motion controller) 套(kit) 1 世椿自主開發
(Second independent R&D?)
自動灌膠軟件
（Automatic potting software） 套(kit) 1 世椿自主開發
(Second independent R&D?)
儲料桶儲料桶（Glue storage tank） 套(kit) 2 30L不銹鋼料桶，具缺料自動報警功能
(30L stainless steel glue storage tank, with glue short alarming function)
點膠閥門（Dispensing valve） 套(kit) 1 世椿自主開發
(Second independent R&D?)

機器性能：
1.WINDOWS2000/XP中文操作界面，易學易懂；
(WINDOWS2000/XP Operating interface, easy to learn and understand.)
2.灌膠形狀可實現點、線、面、弧、圓或不規則曲線連續補間及三軸聯動等功能，能適應任何不規則物件灌膠；
(Functions of drawing points, lines, surfaces, circle, consecutive complement of irregular curves and three axes linkage available, applicable to any irregular product potting. )
3.硬盤有超大儲存記憶容量，無存儲程序，無需重新編程，且軟體具有區域陣列，平移旋轉運算等功能；
(Hard disk has super memory capacity for storage of program, and software has functions of regional array, translation, rotation and computation, etc.)
4.膠量大小粗細、涂膠速度、點膠時間、停膠時間皆可參數設定、出膠量穩定,不漏滴膠；
(Potting volume, speed, time, and halting time can be set by parameters; glue outflow is quite stable with no leaking or dripping.)
5.可選配CCD視覺編程系統，實現快速編程；
CCD visual programming optional, realizing fast programming process.
6．采用自動升降門、自動密封機構，減少人工操作，提高工作效率；
(Automatic overhead door, automatic sealing device, decreasing labor operation while increasing efficiency. )
7．采用倍速鏈輸送系統，可配接駁臺等設備一體化作業；
(Speed chain conveying system, open to conveyor integration operation. )
8.配備德國貝克真空泵，抽吸流量165m3/h；
(Equipped with BECKER vacuum pump with suction flow rate as 165m3/h. )
9.真空壓力表可任意調節參數，真空度達到上限值后真空泵自動停止工作；
(Parameters on the vacuum gauge adjustable, the pump automatically stops working when vacuum degree reaches the limit. )
10.配備安全光柵，確保設備的安全運行；
(Equipped with safety light curtain, make sure the equipment safely work. )
11.配膠、灌膠和軌跡灌封三種功能一體化實現，全自動操作；
((Full automatic process of glue mixing, potting, and various route potting.)
12.按需配比，實現邊混合邊灌膠，大限度節約膠水；
(Glue mixed as needed before and in the process of potting, saving glue as much as possible.)
13.雙料桶設計，A膠和B膠分開儲料，膠水長時間放置不發生固化；
(Dual glue tanks to store A and B glue separately, helping to store glue for a long time.)
14.混合比例從100：100到100：20或100：20~100：10可調，采用動態或靜態混合，混合均勻、充分；
(Mixing ratio adjustable from 100:100 to 100:20 or from100:20 to 100:10, dynamic or static mixing mode optional to ensure fully mixing.)
15.的控制系統，不受氣壓因素影響，避免出膠不均、拉絲、氣泡等現象；
(Unique control system helps to avoid uneven potting, drawing and bubble in the potting process without impaction from air pressure.)
16.Z軸高度調整裝置能適應不同高度的工件作業；
(Height-adjusting device of Z-axis enables to work for workpiece of different height.)
17.儲料桶配有液位感應開關，缺料自動報警；
(Automatic alarming by up /low level materials sensors to avoid short of material.)
18.可選配膠水?dāng)嚢?、加熱并預留真空脫泡功能，適用于不同種類的灌注工藝。
(Optional functions of stirring, heating and vacuum defoamation, fit for various potting /dispensing process.)

查看全部介紹