Interflux IF14 Manual soldering

The advised working temperature is between 320°C and 360°C. For more dense metals like Nickel, the temperaturemay be elevated to 400°C. The use of a good soldering station is important. Use a soldering station with a short response time and with enough power for your application. Choose the correct soldering tip: to reduce the thermalresistance, it is important to create a large contact area with the surfaces to be soldered. Heat up both the surfacessimultaneously. Slightly touch with the solder wire, the point where soldering tip and the surfaces to be solderedmeet (the small quantity of solder ensures a drastic lowering of the thermal resistance). Add subsequently withoutinterruption, the correct amount of solder close to the soldering tip without touching the tip. This will reduce therisk on flux spitting and premature flux consumption!

查看全部介紹